S
Supersonic
Guest
Merry Christmas to all, I write from Italy.
I expose my question
I'm making a truck with a crane leimbach and are struggling with the electrical system
I need 8 channels for trucks and 11 for the crane, total 19.
I have a sender with 12 channel
I saw two switching modules, one of CTI and one of Leimbach
Leimbach:
Mit diesem Baustein können 6 Steuerkanäle (Servofunktionen) empfängerseitig auf weitere
6 Steuerfunktionen umgeschaltet werden.
Anwendungsbeispiel wäre z.B. ein Ladekran, bei dem die Steuerknüppel zwischen
den Hydraulikfunktionen des Krans und den Fahrfunktionen des LKW umgeschaltet werden.
Technische Daten:
Größe: L 71mm, B 42mm, H 19mm
Gewicht: 30g
Stromaufnahme: ohne Servos 10mA
Eingänge: 6 Propkanäle
Ausgänge: 2x 6 Propkanäle
CTI:
Funktionswahlschalter 12x2 z.Umschaltung von bis zu 12 Empfangskanälen. Mit 12 Servoanschlußkabeln. Ca. 96x22x6mm. CTI-Produkt. 1 Steuerleitung.
some questions:
1)I have never seen these forms, and do not know how to be connected, someone used them, has a diagram to show me? Leimbach is easy, CTI don't know.
2)can connect two modules leimbach to a single channel?
3)if I choose the CTI module, is enough for me or what I need alri additional modules, I saw other modules appointed 1 2 3 4 etc ...
4)I read that the CTI module THAT has problems with products Servonaut and channel 3, the controller can not be switched, confirmed?
5)can you help me in the choice, and if you can show me with some scheme designed the two modules, you can aiutrmi understand ???
6)example, if I use the truck, and I turn on the 4 arrows, then I trigger the switch to use the crane, the 4 arrows remain on or off???, the same for the sound ...
I would like to know before spending money
Many for help me , and best regard.
PS: I apologize for writing, but I use a translator
I expose my question
I'm making a truck with a crane leimbach and are struggling with the electrical system
I need 8 channels for trucks and 11 for the crane, total 19.
I have a sender with 12 channel
I saw two switching modules, one of CTI and one of Leimbach
Leimbach:
Mit diesem Baustein können 6 Steuerkanäle (Servofunktionen) empfängerseitig auf weitere
6 Steuerfunktionen umgeschaltet werden.
Anwendungsbeispiel wäre z.B. ein Ladekran, bei dem die Steuerknüppel zwischen
den Hydraulikfunktionen des Krans und den Fahrfunktionen des LKW umgeschaltet werden.
Technische Daten:
Größe: L 71mm, B 42mm, H 19mm
Gewicht: 30g
Stromaufnahme: ohne Servos 10mA
Eingänge: 6 Propkanäle
Ausgänge: 2x 6 Propkanäle
CTI:
Funktionswahlschalter 12x2 z.Umschaltung von bis zu 12 Empfangskanälen. Mit 12 Servoanschlußkabeln. Ca. 96x22x6mm. CTI-Produkt. 1 Steuerleitung.
some questions:
1)I have never seen these forms, and do not know how to be connected, someone used them, has a diagram to show me? Leimbach is easy, CTI don't know.
2)can connect two modules leimbach to a single channel?
3)if I choose the CTI module, is enough for me or what I need alri additional modules, I saw other modules appointed 1 2 3 4 etc ...
4)I read that the CTI module THAT has problems with products Servonaut and channel 3, the controller can not be switched, confirmed?
5)can you help me in the choice, and if you can show me with some scheme designed the two modules, you can aiutrmi understand ???
6)example, if I use the truck, and I turn on the 4 arrows, then I trigger the switch to use the crane, the 4 arrows remain on or off???, the same for the sound ...
I would like to know before spending money
Many for help me , and best regard.
PS: I apologize for writing, but I use a translator